Frequently Asked Questions
- Are there any health benefits that come from HVAC system cleaning?
- Will HVAC system cleaning reduce our home energy bills?
- How should a residential HVAC system be cleaned?
- How often should residential HVAC systems be cleaned?
- What Kind of Equipment is Best for Cleaning - Truck-Mounted
or Portable Vaccuums?
- What is a Normal Price Range for Air Duct Cleaning Service?
- What Criteria should I use in selecting an HVAC system cleaner?
- Why Should I Choose a National Air Duct Cleaners Association
(NADCA) Member to Clean My Air Ducts?
- What Are Sanitizers and Why Would They Need to Be Used?
- How long should it take to clean a typical residential HVAC system?
- How can we determine if the HVAC system cleaning was effective?
Heating, ventilation and air conditioning (HVAC) systems have been shown to act as a collection source for a variety of contaminants that have the potential to affect health, such as mold, fungi, bacteria, and very small particles of dust. The removal of such contaminants from the HVAC system and home should be considered as one component in an overall plan to improve indoor air quality. Back to Top
Research by the U.S. EPA has demonstrated that HVAC system cleaning may allow systems to run more efficiently by removing debris from sensitive mechanical components. Clean, efficient systems are less likely to break down, have a longer life span, and generally operate more effectively than dirty systems. Back to Top
The most effective way to clean air ducts and ventilation systems is to employ Source Removal methods of cleaning. This requires a contractor to place the system under negative pressure, through the use of a specialized, powerful vacuum. While the vacuum draws air through the system, devices are inserted into the ducts to dislodge any debris that might be stuck to the interior surfaces. The debris can then travel down the ducts to the vacuum, which removes it from the system and the home. Back to Top
Frequency of cleaning depends on several factors, not the least of which is the preference of the home owner. Some of the things that may lead a home owner to consider more frequent cleaning include:
- Smokers in the household
- Pets that shed high amounts of hair and dander
- Water contamination or damage to the home or HVAC system
Residents with allergies or asthma who might benefit from a reduction in the amount of indoor air pollutants in the home's HVAC system. Back to Top
There are two main types of vacuum collection devices: (1) those
mounted on trucks and trailers, and (2) portable units. Truck/trailer
mounted equipment is generally more powerful than portable equipment.
However, portable equipment can often be brought directly into
a facility, allowing the vacuum source to be located closer to
the ductwork. All vacuum units should be attached to a collection
device for safe containment prior to disposal. Any vacuum collection
device which exhausts indoors must be HEPA (high efficiency particulate
arrestance) filtered. A vacuum collection device alone will not
get an HVAC system clean. The use of methods and tools designed
to agitate debris adhered to the surfaces within the system, in
conjunction with the use of the vacuum collection device(s), is
required to clean HVAC systems. (For example: brushes, air whips,
and “skipper balls.”)
Back to Top
The Environmental Protection Agency says that “duct cleaning services typically – but not always – range in cost from $450 to $1000 per heating and cooling system, depending on the services offered, the size of the system to be cleaned, system accessibility, climactic region, and level of contamination” and type of duct material. Consumers should beware of air duct cleaning companies that making sweeping claims about the health benefits of duct cleaning – such claims are unsubstantiated. Consumers should also beware of “blow-and-go” air duct cleaning companies. These companies often charge a nominal fee and do a poor job of cleaning the heating and cooling system. These companies may also persuade the consumer into unneeded services with and/or without their permission. (If you have knowledge of a practicing “blow-and-go” air duct cleaner, contact your local Better Business Bureau to report the company, and your local, federal, and state elected officials to demand legislation.) Back to Top
Interview as many local contractors as you can, and ask them to come to your home to perform a system inspection and give you a quotation. To narrow down you pool of potential contractors, use the following pre-qualifications:
- Make sure the company is a member in good standing of the National Air Duct Cleaners Association (NADCA).
- See if the company has been in business long enough to have adequate experience.
- Inquire whether the company is in good standing with your local Better Business Bureau.
- Get proof that the company is properly licensed and adequately insured.
- Verify that the company is certified by NADCA to perform HVAC system cleaning.
- Make sure the company is going to clean and visually inspect all of the air ducts and related system components.
- Avoid advertisements for "$99 whole house specials" and other sales gimmicks.
- Ask if the company has the right equipment to effectively perform cleaning, and if the company has done work in homes similar to yours? Get references from neighbors if possible.
NADCA Members have signed a Code of Ethics stating they will do everything possible to protect the consumer, and follow NADCA Standards. Air duct cleaning companies must meet stringent requirements to become a NADCA Member. Among those requirements, all NADCA Members must have certified Air System Cleaning Specialists (ASCS) on staff, who have taken and passed the NADCA Certification Examination . Passing the exam demonstrates extensive knowledge in HVAC design and cleaning methodologies. ASCS's are also required to further their industry education by attending seminars in order to maintain their NADCA certification status. Back to Top
Sanitizers are anti-microbial chemicals applied to the interior surface of the air ducts, designed to control microbial contamination. Before any sanitizers are used, the system should be thoroughly cleaned. It is critical that any anti-microbial treatment used in your system be EPA registered for the intended use in HVAC systems. Ask to see the chemical’s Material Safety Data Sheet (MSDS). If you are still concerned, call the EPA at 1-800-438-4318. It should be noted that there are no EPA registered anti-microbial products for use on porous system surfaces – such as fiberglass surfaces. Back to Top
The amount of time it takes to clean a residential HVAC system depends on many variables such as the size of the home, the number of systems, the extent of the contamination and the number of HVAC cleaners performing the job. Ask at least two contractors to inspect your system and give you a time estimate for your particular system. This will give you a general idea of how long the job should take as well as an idea of how thoroughly the contractor plans to do the job. Back to Top
The best way to determine if HVAC system cleaning is effective is to perform a visual inspection of the system before and after cleaning. If any dust or debris can be seen during the visual inspection, the system should not be considered cleaned. While you can perform your own visual inspection using a flash light and mirror, a professional cleaning contractor should be able to allow you better access to system components and perhaps the use of specialized inspection tools. In addition, following this post-cleaning check list can help to ensure a top quality job. Back to Top