Boston, GA HVAC Service

Today I arrived on site to perform routine maintenance and inspection of the HVAC system. **Indoor Unit (Air Handler):** * Located in the garage/attic. * Replaced the air filters with the customer's spare filters (sizes 20x30x1 and 12x12x1). * Confirmed the indoor coil is in fair and clean condition. **Outdoor Unit (Heat Pump):** * Located in the backyard. * Determined the outdoor coil is in poor, but clean condition. **Electrical Components:** * Verified the blower motor, condenser fan motor, compressor, blower run capacitor, compressor run capacitor, fan run capacitor, compressor start capacitor, contactor, and electrical wiring are functioning within manufacturer specifications. **System Components:** * Confirmed the blower wheel, secondary drain pan, primary drain pan, electrical wires, and ductwork are in good working condition. **Condensate Drain System:** * Cleared the drain line. * Cleaned out the primary and secondary drain pans. **Measurements:** * R

Today, I arrived on site to perform a summer maintenance check on the HVAC equipment. * Overall equipment condition: Fair * Location of indoor unit: Attic (Air Handler) * Area unit services: Whole home * Filtration type: Pleated 1" * Filter sizes: 20x30x1 and 12x12x1 * Condition of indoor coil: Good, clean * Location of outdoor unit: Back yard (Heat Pump) * Condition of outdoor coil: Good, clean Electrical components tested and found to be working properly: * Blower Motor * Condenser Fan Motor * Compressor * Blower Run Capacitor * Compressor Run Capacitor * Fan Run Capacitor * Contactor * Electrical Wiring Components inspected and in good condition: * Blower Wheel * Primary Drain Pan * Electrical wires secured Components not working properly: * N/A Additional tests conducted: * Carbon Monoxide test: N/A * Return air temperature: 70.0°F * Supply air temperature: 49.0°F * Condensate drain system: Cleared drain line, cleaned out primary pan Other actions taken: * Wore shoe covers *

Job Summary Today, I arrived on site to perform maintenance on the HVAC system located in the garage attic. Overall Equipment Condition Equipment condition assessed as fair. Indoor Unit Details Type: Air Handler Filtration: Replaced spare filters (Pleated 1") Filter Sizes: 20x30x1 & 12x12x1 Indoor Coil Condition: Fair Outdoor Unit Details Location: Side of House Type: Heat Pump Outdoor Coil Condition: Fair, Clean Electrical Components Tested All components tested and functioning within manufacturer specifications: Blower Motor Heat Strip Kit Condenser Fan Motor Compressor Blower Run Capacitor Compressor Run Capacitor Fan Run Capacitor Compressor Start Capacitor Contactor Electrical Wiring Inspections Conducted Components in good condition: Blower Wheel Secondary Drain Pan Primary Drain Pan Electrical Wires Secured No components found in poor condition. Temperature Readings Return Air Temperature: 74.0°F Supply Air Temperature: 120.0°F Condensate Drain System Cleared drain line a

I performed a winter time maintenance on your HVAC equipment today. Here is a summary of the work I completed: Overall Equipment Condition: Good Location, Type, and Picture of Indoor Unit: Garage, Attic, Air Handler Area Unit Services: Whole house Filtration: Pleated 1", Replaced Today Filter Size: 20x30x1, 12x12x1 Condition of Indoor Coil: Good Location, Type, and Picture of Outdoor Unit: Back Yard, Heat Pump Condition of Outdoor Coil: Good, Cleaned Today I tested and inspected the following electrical components on your equipment and found them to be working properly within the manufacturers recommended specs and amperage's: Blower Motor Heat Strip Kit Condenser Fan Motor Compressor Compressor Run Capacitor Fan Run Capacitor Contactor Defrost Control Board Electrical Wiring Electric Heat Strip Kit Safety's There were no electrical components that were not working properly or not within the manufacturers recommended specs and amperage's. I inspected the following components on your